NEED a FUEL PUMP for my 64 292 Y block
NEED a FUEL PUMP for my 64 292 Y block
My local parts store looked at me like I had 4 heads when I asked for a Fuel pump for my 292. And I searched Dennis Carpenter and all they show is up to 63 any ideas if it will work? Or will any other Ford fuel pump cross over?
Re: NEED a FUEL PUMP for my 64 292 Y block
Bought mine at the local oriellys. Another good source for parts is rock auto. Only drawback is their online only.
1963 uni PATINA BLUE
1965 short bed
1965 short bed
Re: NEED a FUEL PUMP for my 64 292 Y block
I have an one of those here in town.. I will see what they can do.... My go to parts store was no help...
Re: NEED a FUEL PUMP for my 64 292 Y block
i just posted about mine going out too. napa has the mechanical one in stock for like 34 bucks. i'm going electric but mechanical works good too.
"A pint of sweat will save a gallon of blood."-General George S. Patton Jr.
- charliemccraney
- Posts: 1743
- Joined: July 9, 2008, 10:02 pm
- Location: Lawrenceville, GA
Re: NEED a FUEL PUMP for my 64 292 Y block
The pump for the '63 should work. If you don't need 100% original, FE pumps work great on most Y blocks. Compare the arms before you install, to verify.
Lawrenceville, Ga
1961 F100 Unibody
318 Y-block (292 +.070 bore, +.170 stroke), FMS T5-Z w/Mustang 10.5" diaphragm clutch.
1961 F100 Unibody
318 Y-block (292 +.070 bore, +.170 stroke), FMS T5-Z w/Mustang 10.5" diaphragm clutch.

