Safety when using POR-15
Safety when using POR-15
For all you folks who swear by POR-15 and slop it on everything, please be careful and use the right safety equipment when doing so...
http://autobody101.com/forums/viewtopic.php?t=8733
http://autobody101.com/forums/viewtopic.php?t=8733
"If you don't want to stand behind our Troops, feel free to stand in front of them."
1964 Ford F100
1967 US Army M416
1964 Ford F100
1967 US Army M416
- FORDBOYpete
- Posts: 850
- Joined: July 21, 2006, 8:30 am
- Location: East Central Florida USA
Max,
I can't tell you how many times I've written about the generation of this highly toxic byproduct when using the POR line of products.
I finally gave up because people wanted to argue over viability of my claims, but they wouldn't get a MSDS & read Haz Mat warnings themelves.
Reminds me of really messed up & dead guys I used to know who told me Imron was perfectly safe & harmless to use back in the day too.
Isocyanate exposure deteriorates animal tissue nervous systems and eventually causes the body to shut down completely. It is not a pleasant sight either. It's similar to cholenstrase inhibition, another ugly way to go. FWIW
FBp

I can't tell you how many times I've written about the generation of this highly toxic byproduct when using the POR line of products.
I finally gave up because people wanted to argue over viability of my claims, but they wouldn't get a MSDS & read Haz Mat warnings themelves.
Reminds me of really messed up & dead guys I used to know who told me Imron was perfectly safe & harmless to use back in the day too.
FBp
Change is the Only Constant
Isocyanates are bad, bad, baaaaad news!!!
It's not like being around gasoline fumes your whole life either - it doesn't take much of that stuff in your lungs to start affecting things.
Also, aside from inhaling the fumes - your body absorbs it through exposed skin and your eyes! There is a reason why you sometimes see painters wearing full body suits and masks.
I know not everyone here will paint their own trucks, but many autobody products and finishing solvents have iso's in them.
It's not like being around gasoline fumes your whole life either - it doesn't take much of that stuff in your lungs to start affecting things.
Also, aside from inhaling the fumes - your body absorbs it through exposed skin and your eyes! There is a reason why you sometimes see painters wearing full body suits and masks.
I know not everyone here will paint their own trucks, but many autobody products and finishing solvents have iso's in them.
"If you don't want to stand behind our Troops, feel free to stand in front of them."
1964 Ford F100
1967 US Army M416
1964 Ford F100
1967 US Army M416
- ripsnorter
- Posts: 607
- Joined: November 12, 2006, 5:23 am
- Location: Washington State
I've yet to use any POR products.
However I was raised in a fiberglas and autobody shop. From about 8 years on I was either welding or painting or do something that probably had a chemical in it. I at least wore a respirator 90% of the time, but my dad would walk into the glas shop, grab the choppergun, no mask, not even a dust mask, and start spraying. The room would be so full of mist you couldnt see 10 feet, and he'd be in there inhaling the stuff.
His reason was because he hated to have anything hanging off him like a respirator.
I have to admit that when I do paint (not much anymore) Oftentimes I only wear a dustmask or sometimes nothing at all. Its easy to be lazy about putting on some safety equipment, and just because you hear the people that have been in the business for years say "aww heck man its fine, doesnt do no harm" doesnt mean anything. you'd be surprised how many people that have been working in chemicals for 20+ years dont bother to find out whats in the chemicals they so happily breathe or dip their hands in.
I've spent a good portion of my youth buried up to my elbows in resin, catalyst (hurts after a while), various paints and reducers and especially acetone. I'm still not sure what possible damage that stuff can do to you, but it doesnt hurt to be careful.
However I was raised in a fiberglas and autobody shop. From about 8 years on I was either welding or painting or do something that probably had a chemical in it. I at least wore a respirator 90% of the time, but my dad would walk into the glas shop, grab the choppergun, no mask, not even a dust mask, and start spraying. The room would be so full of mist you couldnt see 10 feet, and he'd be in there inhaling the stuff.
His reason was because he hated to have anything hanging off him like a respirator.
I have to admit that when I do paint (not much anymore) Oftentimes I only wear a dustmask or sometimes nothing at all. Its easy to be lazy about putting on some safety equipment, and just because you hear the people that have been in the business for years say "aww heck man its fine, doesnt do no harm" doesnt mean anything. you'd be surprised how many people that have been working in chemicals for 20+ years dont bother to find out whats in the chemicals they so happily breathe or dip their hands in.
I've spent a good portion of my youth buried up to my elbows in resin, catalyst (hurts after a while), various paints and reducers and especially acetone. I'm still not sure what possible damage that stuff can do to you, but it doesnt hurt to be careful.
- Alan Mclennan
- Posts: 9324
- Joined: October 14, 2006, 6:16 pm
- Location: In the shed... Cranebrook NSW

Amen to that.
I`ve been a plumber for 36 years, and most days would come home with PVC etch primer and solvent cement on my hands.they are now saying that some of what we thought was old age coming on might be the results of long term contact with these chemicals.I have two sons working with me now, and we now use a water based primer but are stuck with the solvent cement thou (pun not intended)so yes be very carefull!!!!!!!.
Alan
I`ve been a plumber for 36 years, and most days would come home with PVC etch primer and solvent cement on my hands.they are now saying that some of what we thought was old age coming on might be the results of long term contact with these chemicals.I have two sons working with me now, and we now use a water based primer but are stuck with the solvent cement thou (pun not intended)so yes be very carefull!!!!!!!.
Alan
Honey, If I say I`ll fix something I will, there`s no need to remind me every 6 months!!
66 f100 tabletop swb 351 Clevo C6 "Beryl"
Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8..............................
66 f100 tabletop swb 351 Clevo C6 "Beryl"
Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8..............................
-
shawns fords
- Posts: 1111
- Joined: March 31, 2007, 11:34 am
- Location: Foxfield Colorado
- Contact:
ive used por15 products and I follow the destructions, as well the enviromentally safe products I use now through my wood flooring industry also contain them Isocyanates and other olys, yet the gov regulations allow it, as long as the (voc) volatile organic compound specs drop always wear a mask when using these products, I have been finding out in the past two years the damages they claim to cause.
Gotta watch chemicals period. We used to use a product in the water back in the day in the printing industry, Red Etch. If I am even get a drop on my skin now it will crack wide open a bleed like I cut it. Stuff has been pretty much outlawed now though. Problem is nothing, but nothing works better. Same goes with the alcohol we used to use, synthetic stuff is pure shit. A couple of the reasons I now drive a truck for a living. Funny thing is you should see some of the crap I have in my garage, lol.
1964 F 100 - I am going to do "something" with it.......
viewtopic.php?f=32&t=15942
1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD
~ Yes - I adopted another cat..............
Cam L Milan,
You'll be missed my friend.
viewtopic.php?f=32&t=15942
1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD
~ Yes - I adopted another cat..............
Cam L Milan,
You'll be missed my friend.
-
shawns fords
- Posts: 1111
- Joined: March 31, 2007, 11:34 am
- Location: Foxfield Colorado
- Contact:


