Safety when using POR-15

A place for discussion of off topic subjects. Pretty much anything goes - just keep it civil, please!

Moderators: Casey 65, Kid

Post Reply
User avatar
Max
Posts: 3456
Joined: July 11, 2006, 11:53 am
Location: 29°35'07.00"N 95°09'07.49"W
Contact:
United States of America

Safety when using POR-15

Post by Max »

For all you folks who swear by POR-15 and slop it on everything, please be careful and use the right safety equipment when doing so...

http://autobody101.com/forums/viewtopic.php?t=8733
"If you don't want to stand behind our Troops, feel free to stand in front of them."

1964 Ford F100
1967 US Army M416
User avatar
FORDBOYpete
Posts: 850
Joined: July 21, 2006, 8:30 am
Location: East Central Florida USA

Post by FORDBOYpete »

Max,

I can't tell you how many times I've written about the generation of this highly toxic byproduct when using the POR line of products. no.gif down_1_Revan.gif

I finally gave up because people wanted to argue over viability of my claims, but they wouldn't get a MSDS & read Haz Mat warnings themelves. :roll:
Reminds me of really messed up & dead guys I used to know who told me Imron was perfectly safe & harmless to use back in the day too. :oops:

fyi.gif Isocyanate exposure deteriorates animal tissue nervous systems and eventually causes the body to shut down completely. It is not a pleasant sight either. It's similar to cholenstrase inhibition, another ugly way to go. FWIW shrug.gif nono.gif

FBp scared.gif :peepwall: nono.gif
Change is the Only Constant
User avatar
Max
Posts: 3456
Joined: July 11, 2006, 11:53 am
Location: 29°35'07.00"N 95°09'07.49"W
Contact:
United States of America

Post by Max »

Isocyanates are bad, bad, baaaaad news!!!

It's not like being around gasoline fumes your whole life either - it doesn't take much of that stuff in your lungs to start affecting things.

Also, aside from inhaling the fumes - your body absorbs it through exposed skin and your eyes! There is a reason why you sometimes see painters wearing full body suits and masks.

I know not everyone here will paint their own trucks, but many autobody products and finishing solvents have iso's in them.
"If you don't want to stand behind our Troops, feel free to stand in front of them."

1964 Ford F100
1967 US Army M416
User avatar
ripsnorter
Posts: 607
Joined: November 12, 2006, 5:23 am
Location: Washington State

Post by ripsnorter »

I've yet to use any POR products.

However I was raised in a fiberglas and autobody shop. From about 8 years on I was either welding or painting or do something that probably had a chemical in it. I at least wore a respirator 90% of the time, but my dad would walk into the glas shop, grab the choppergun, no mask, not even a dust mask, and start spraying. The room would be so full of mist you couldnt see 10 feet, and he'd be in there inhaling the stuff.

His reason was because he hated to have anything hanging off him like a respirator.

I have to admit that when I do paint (not much anymore) Oftentimes I only wear a dustmask or sometimes nothing at all. Its easy to be lazy about putting on some safety equipment, and just because you hear the people that have been in the business for years say "aww heck man its fine, doesnt do no harm" doesnt mean anything. you'd be surprised how many people that have been working in chemicals for 20+ years dont bother to find out whats in the chemicals they so happily breathe or dip their hands in.

I've spent a good portion of my youth buried up to my elbows in resin, catalyst (hurts after a while), various paints and reducers and especially acetone. I'm still not sure what possible damage that stuff can do to you, but it doesnt hurt to be careful.
User avatar
Alan Mclennan
Posts: 9324
Joined: October 14, 2006, 6:16 pm
Location: In the shed... Cranebrook NSW
Australia

Post by Alan Mclennan »

Amen to that.
I`ve been a plumber for 36 years, and most days would come home with PVC etch primer and solvent cement on my hands.they are now saying that some of what we thought was old age coming on might be the results of long term contact with these chemicals.I have two sons working with me now, and we now use a water based primer but are stuck with the solvent cement thou (pun not intended)so yes be very carefull!!!!!!!.

Alan
Honey, If I say I`ll fix something I will, there`s no need to remind me every 6 months!!
66 f100 tabletop swb 351 Clevo C6 "Beryl"

Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8.............................. cry.gif
Phil
Posts: 2125
Joined: June 1, 2007, 9:37 pm
Location: toledo

Post by Phil »

Glad I never sprayed it.
Got it in my eye once :wink:
Someday I'll get another slick :(
Image
User avatar
Ford4jack
Posts: 707
Joined: July 22, 2006, 7:56 am
Location: Tennessee

Post by Ford4jack »

Y'all got that right protection is very important when dealing with chemicals

Lead's a bad one to work with also I'm living proof of this.
shawns fords
Posts: 1111
Joined: March 31, 2007, 11:34 am
Location: Foxfield Colorado
Contact:

Post by shawns fords »

ive used por15 products and I follow the destructions, as well the enviromentally safe products I use now through my wood flooring industry also contain them Isocyanates and other olys, yet the gov regulations allow it, as long as the (voc) volatile organic compound specs drop always wear a mask when using these products, I have been finding out in the past two years the damages they claim to cause.
User avatar
Greg D
Posts: 10113
Joined: September 13, 2006, 4:39 pm
Location: Podunk Iowa
United States of America

Post by Greg D »

Gotta watch chemicals period. We used to use a product in the water back in the day in the printing industry, Red Etch. If I am even get a drop on my skin now it will crack wide open a bleed like I cut it. Stuff has been pretty much outlawed now though. Problem is nothing, but nothing works better. Same goes with the alcohol we used to use, synthetic stuff is pure shit. A couple of the reasons I now drive a truck for a living. Funny thing is you should see some of the crap I have in my garage, lol.
1964 F 100 - I am going to do "something" with it.......

viewtopic.php?f=32&t=15942

1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD


~ Yes - I adopted another cat..............

Cam L Milan,
You'll be missed my friend.
shawns fords
Posts: 1111
Joined: March 31, 2007, 11:34 am
Location: Foxfield Colorado
Contact:

Post by shawns fords »

I almost forgot I need to pic my front end tomorrow also, that thing was por15 the entire front axel it semi gloss it came out sweet, I put 3 coats on it too, it wont ever rust again (Ihope) lol
Z-MAN
Posts: 213
Joined: May 21, 2007, 9:28 pm
Location: Houston

Post by Z-MAN »

I learned the hard way and learned that it has to wear off. :shock: I sanded some of it off, but some of it I had to let wear off. I now where gloves and a respirator mask when I use it. Wife suggested I use gloves in the first place, but what does she know. :)

Z

[albumimg]2724[/albumimg]
Post Reply