Is This The Correct Alternator Pulley For A 1965 F250?

The place to talk Slicks. All we ask is that discussion has something to do with slicks...

Moderators: Casey 65, Kid

Post Reply
chris401
Posts: 916
Joined: October 31, 2011, 2:37 pm
Location: Waco, Texas
United States of America

Is This The Correct Alternator Pulley For A 1965 F250?

Post by chris401 »

I read the correct 2 groove alternator pulleys were cast iron. Would this pulley be correct for my 352 F250?
Image
Chris
chris401
Posts: 916
Joined: October 31, 2011, 2:37 pm
Location: Waco, Texas
United States of America

Re: Is This The Correct Alternator Pulley For A 1965 F250?

Post by chris401 »

My pickup was plain dual belt alternator, no other options. Anyone have a photo of the correct pulley?
Chris
ICEMAN6166
Posts: 11470
Joined: July 11, 2006, 11:28 am
Location: Dove Creek, Co. elevation 6842
Poland

Re: Is This The Correct Alternator Pulley For A 1965 F250?

Post by ICEMAN6166 »

Chris
i got a lot of actual pics, i will keep looking but this exploded diagram does show the 2 belt pulley
Image

only cast iron pulleys i can recall are on the FT that came out of a 65 or 66 bus, not sure if the alt had one or not
Image

looked thru 56 pages of pics and still i have not located the 2 pulley alt , i will look some more.
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
chris401
Posts: 916
Joined: October 31, 2011, 2:37 pm
Location: Waco, Texas
United States of America

Re: Is This The Correct Alternator Pulley For A 1965 F250?

Post by chris401 »

Thanks. I'll try to relocate that post. Poster said stamped steel pulleys were not correct. Maybe I miss read the truck they were talking about. From what a couple older techs have said on my engine compartment have an old U-Haul rental truck. Apparently the same set up a governed 1 ton would have.
Chris
ICEMAN6166
Posts: 11470
Joined: July 11, 2006, 11:28 am
Location: Dove Creek, Co. elevation 6842
Poland

Re: Is This The Correct Alternator Pulley For A 1965 F250?

Post by ICEMAN6166 »

the one in your pic looks like machined steel which is an upgrade over stamped steel
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
chris401
Posts: 916
Joined: October 31, 2011, 2:37 pm
Location: Waco, Texas
United States of America

Re: Is This The Correct Alternator Pulley For A 1965 F250?

Post by chris401 »

I'll run with that. Wished I kept the round back and pulley that was on it when I first bought it. Never paid attention to what pulley was on it, if still original.
Thanks
Chris
chris401
Posts: 916
Joined: October 31, 2011, 2:37 pm
Location: Waco, Texas
United States of America

Re: Is This The Correct Alternator Pulley For A 1965 F250?

Post by chris401 »

10344 in your post is what a stamped steel would look like if they were going for accuracy.
Chris
chris401
Posts: 916
Joined: October 31, 2011, 2:37 pm
Location: Waco, Texas
United States of America

Re: Is This The Correct Alternator Pulley For A 1965 F250?

Post by chris401 »

I found this alternator on a 67 330 MD. The stamping on the pulley is C5TF-10A352-K2. If these trucks had cast pulleys this is probably it. Transferring the pulley to mine till I rebuild the correct round back Autolite on the left.

Image
Image
Image
Image
Chris
LM14
Posts: 1755
Joined: August 22, 2009, 10:44 pm
Location: Bloomfield, Iowa
United States of America

Re: Is This The Correct Alternator Pulley For A 1965 F250?

Post by LM14 »

http://www.mustangtek.com/pulley/Pulley.html

Great pulley and casting number info.
1932 Ford 5 window coupe. 302/C4
1962 8V-390/C6 Unibody Short Bed Soon to be Big Window - The Lincoln that never was
2013 F150 Super Crew Eco Boost 4x4
2015 Ford Edge for the little lady, because she said so!
2007 Mustang GT, 4.6-3V/5 Speed. Only 8680 miles on the clock.

More toys, I need more toys!!!
chris401
Posts: 916
Joined: October 31, 2011, 2:37 pm
Location: Waco, Texas
United States of America

Re: Is This The Correct Alternator Pulley For A 1965 F250?

Post by chris401 »

LM14 wrote:http://www.mustangtek.com/pulley/Pulley.html

Great pulley and casting number info.
I didn't see my dual belt application on there.
Chris
Post Reply