65 redhead steering box in a 64 w/ new column

The place to talk Slicks. All we ask is that discussion has something to do with slicks...

Moderators: Casey 65, Kid

Post Reply
cdc3jj
Posts: 49
Joined: May 11, 2015, 9:24 pm

65 redhead steering box in a 64 w/ new column

Post by cdc3jj »

I read so many good things about the redhead steering boxes it makes me want to try one. Problem is my truck is a 64 with the interconnected box and column shift. I'm planning on putting in a t5 or SROD, so the shifter is moving to the floor. I've been looking at flaming river columns and a 65 redhead box. My question is: has anyone put a 65 box in their 64? Using and aftermarket column? What length column did you use and will the 65 box use the same mounting holes? Motor is a 223 without any power steering. I want it to steer tighter with tilt so I can use a smaller 15 or 16 inch mustang steering wheel but I don't need/want power steering. I've read that redhead adds bearings which make the steering much tighter and easier. Also, I don't really want to cut my column. So any accounts of previous experiences would awesome. Thanks so much.
SteveCanup
Posts: 1096
Joined: November 7, 2014, 11:08 pm
Location: Wytheville, Virginia
United States of America

Re: 65 redhead steering box in a 64 w/ new column

Post by SteveCanup »

Watching...
1964 F-100
Image
User avatar
Roger Carter
Posts: 730
Joined: July 5, 2008, 7:11 pm
Location: Corbett, Oregon
United States of America

Re: 65 redhead steering box in a 64 w/ new column

Post by Roger Carter »

I have not done the conversion you are talking about and don't believe I have encountered anyone that has. Try using the search function on this site and see what shows up.

The steering systems on the '64 (straight axle) and the '65 (Twin I Beam) are totally different, with no parts interchange. The '64 drag link moves front to rear while the '65 moves side to side. The frames, steering box mounting methods and locations are different between the years as well.

I'm sure what you propose is possible, but not without a considerable amount of work and expense.

Good luck.
Roger Carter
cdc3jj
Posts: 49
Joined: May 11, 2015, 9:24 pm

Re: 65 redhead steering box in a 64 w/ new column

Post by cdc3jj »

I didn't realize the drag links moved differently. You may have saved me the $400 for the redhead box I was eyeballing. I'll be looking at other options. Just found a tech article on the Toyota conversion and I'll be reading it this afternoon. Thanks for the quick reply.
64 f100
Posts: 2754
Joined: July 18, 2006, 7:23 am
Location: Carmi, Illinois, 62821

Re: 65 redhead steering box in a 64 w/ new column

Post by 64 f100 »

There are two or three different ways of doing power steering on those trucks. Toyota conversion, original power steering which is about 900$ for the setup new. I think Harrison makes it as they made the originals, and another more sanitary conversion but I don't know who makes it. Similar to the Toyota conversion. Both the Toyota conversion and the other one I spoke of are cheaper than the original. There is also rack and pinion conversion. I have considered all three and even seen another conversion with a GM steering box, which I did not like as it hung down below the frame and was visible if standing off from the truck. As to steering improvements I would make sure the front spring bushings and shackle bushings are new or in very good condition, add a panhard bar and sway bar. Same with the rear.
1961 F350
1964 Galaxie convertable
1964 flairside, style side, and longbed
1965 Ranger, and shortbed
1966 long bed, and shortbed
A few parts trucks also
1991 Capri
2011 F250
2004 Lexus
cdc3jj
Posts: 49
Joined: May 11, 2015, 9:24 pm

Re: 65 redhead steering box in a 64 w/ new column

Post by cdc3jj »

I'm hoping to avoid power steering actually. I would prefer to stay manual. Mainly because I l don't want to try to attach a ps pump to the 223. The Toyota swap seems like a viable option if you don't mind building your own pitman arm. I'm not crazy about that personally. I am now looking at mustang ii or Dakota options as it seems to be the only actual manual rack option that I can afford as I can't find a crown Vic manual rack. I know no limit made a rack at some point by I guess it's long gone.
User avatar
Toyz
Posts: 4334
Joined: March 22, 2011, 6:23 pm
Location: Baja Houston Taxes
United States of America

Re: 65 redhead steering box in a 64 w/ new column

Post by Toyz »

I'm surprised that No Limit stopped carrying them. It would be interesting to understand why. Performance Online makes a similar power rack and pinion; it might be worth checking if they would supply a manual one. CPP makes a replacement box and I believe they can supply the pitman arm. It is based on the now-rare Toyota. Someone posted recently about doing that conversion either here or on the FB forum.
Paul
The Ford Orphanage
Life's too short for boring vehicles!
My quest to develop a universal solvent is held up by the lack of a storage container.
Paul
cdc3jj
Posts: 49
Joined: May 11, 2015, 9:24 pm

Re: 65 redhead steering box in a 64 w/ new column

Post by cdc3jj »

I've solved this problem by picking up a crown Vic front end Saturday. Unfortunately I've brought on a few new ones. Like rear axle options to match lug patterns as well as attaching a power steering pump to a motor that never had one. It's a 223. And running a drive belt for said pump. Etc. more threads to come after I do some research. Thanks for the tips so far.
bruceandersson
Posts: 906
Joined: August 12, 2009, 9:44 am
Location: Ohio

Re: 65 redhead steering box in a 64 w/ new column

Post by bruceandersson »

I think you made a good choice. Either CV or mustang II would be the way to really address steering.
User avatar
Roger Carter
Posts: 730
Joined: July 5, 2008, 7:11 pm
Location: Corbett, Oregon
United States of America

Re: 65 redhead steering box in a 64 w/ new column

Post by Roger Carter »

Take a look at the electric power steering system used on newer vehicles. These conversions do away with the need for the hydraulics of a conventional power steering system.

I have see a how to video from a Mustang parts supplier on the conversion done to an early Mustang. I can't locate the link but I will keep searching and post it when I find it. The conversion would be very similar for a Slick.
Roger Carter
Post Reply