Wiper bracket bolts

The place to talk Slicks. All we ask is that discussion has something to do with slicks...

Moderators: Casey 65, Kid

Post Reply
Leeroy
Posts: 1115
Joined: July 12, 2009, 3:52 am
Location: Melbourne, Australia
Australia

Wiper bracket bolts

Post by Leeroy »

Anyone know what the bolts that go into the plenum/firewall that hold the wiper assembly? I'm assuming 5/16-24 thread but I don't have a tap to check it and my usual bolt store only has 18 thread.
User avatar
Toyz
Posts: 4334
Joined: March 22, 2011, 6:23 pm
Location: Baja Houston Taxes
United States of America

Re: Wiper bracket bolts

Post by Toyz »

I'll check in the morning to verify, but I believe the '64 and older Ford/ Mercury applications, regardless of car or truck, were indeed all fine thread. Stateside, anyway!
Paul
The Ford Orphanage
Life's too short for boring vehicles!
My quest to develop a universal solvent is held up by the lack of a storage container.
Paul
User avatar
unibody madness
Posts: 2147
Joined: December 4, 2008, 4:33 pm
Location: Paradise,CALIFORNIA 95969
United States of America

Re: Wiper bracket bolts

Post by unibody madness »

61s are nf as well
Turk build thread at:
http://slick60s.com/viewtopic.php?f=32&t=18944

It does not matter what you think, it only matters what you do about it!
Leeroy
Posts: 1115
Joined: July 12, 2009, 3:52 am
Location: Melbourne, Australia
Australia

Re: Wiper bracket bolts

Post by Leeroy »

I think 18 AND 24 tpi are both still NF???? I have a 5/16 NC tap, but there's no way that's going to fit. :(
I read in a few places ford used the 24tpi?! I'm not entirely sure, but I know someone on the forum will.
The 18tpi bolts I do have don't really want to wind in.

Appreciate anything you boys can dig up! :cheers:
jamesdfo
Posts: 1637
Joined: February 15, 2011, 10:32 am
Location: Edmonton, Alberta
Canada

Re: Wiper bracket bolts

Post by jamesdfo »

.


Image
Leeroy
Posts: 1115
Joined: July 12, 2009, 3:52 am
Location: Melbourne, Australia
Australia

Re: Wiper bracket bolts

Post by Leeroy »

Hmmmmm well that really screws my theory!! :lol: :oops:

Thanks James, looks like I need the fine tap then!
Post Reply