Steering column wiring

The place to talk Slicks. All we ask is that discussion has something to do with slicks...

Moderators: Casey 65, Kid

Post Reply
User avatar
born4ford
Posts: 86
Joined: January 22, 2014, 7:33 pm
United States of America

Steering column wiring

Post by born4ford »

I'm in the process of re-wiring my '65 F250 (automatic, 2WD) and am having trouble identifying the purpose of each of the 7 wires coming from the steering column. The wiring kit schematic, my Ford wiring schematic and the actual wires coming from the column (I installed a new turn signal switch but the wire colors on the original and on the new switch match) conflict.

Here is what comes from the column now and what I think the wire is for with color code # in parenthesis:

white/blue - front right hand turn (2)
green/white - front left hand turn (3)
blue/yellow - horn (1)
blue - flasher to switch (44)
green - rear right hand turn (282)
green/orange - rear left hand turn? - Ford schematic shows yellow/black (283)
orange/blue - only thing left is the brake switch - Ford schematic shows red/black (810)

I have done a Slick search and checked the web but haven't been able to come up with anything.

Also, I'm not crazy about the chintzy plug the wiring co supplied for the steering column. Can anyone suggest a nice plug with good positive contact for this purpose.

I have only pulled out half of my hair over this re-wiring job so I feel like I'm doing pretty good. Then again, I'm only half done so I could end up bald, I guess.

Julie
ICEMAN6166
Posts: 11470
Joined: July 11, 2006, 11:28 am
Location: Dove Creek, Co. elevation 6842
Poland

Re: Steering column wiring

Post by ICEMAN6166 »

your list is correct
the orange is the red\black power in from brake light switch
green\orange replaced yellow in later years

i have some original 65-66 ford plugs, you could possibly remove the wires\pins from the new plugs and use the factory ones
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
User avatar
Toyz
Posts: 4334
Joined: March 22, 2011, 6:23 pm
Location: Baja Houston Taxes
United States of America

Re: Steering column wiring

Post by Toyz »

Brian's suggestion sounds like the way to go. You might want to purchase a pin removal/installation tool if you don't have one. I like WeatherPak type connectors for non-original applications; they are good enough for NASCAR and industrial applications. The downside is that it takes a rather expensive crimper/die set to do them well!
Paul
The Ford Orphanage
Life's too short for boring vehicles!
My quest to develop a universal solvent is held up by the lack of a storage container.
Paul
User avatar
Truckrat
Posts: 2513
Joined: July 27, 2006, 5:06 pm
Location: Oklahoma City, Ok.
United States of America

Re: Steering column wiring

Post by Truckrat »

The Iceman is a guru to a lot of us Julie on some of the
mysteries that these old trucks have. He is my ''Go To'' on a lot
of issues too. Bet he can get you dialed in. TR
Post Reply