the pie crusts look pretty good for being 40 plus years old, but i'm not gonna run em.
always
"i believe i've achieved satisfaction".-bubbles
"should i be gettin" baked for this boys?"-bubbles
i could no longer keep "r.i.p.ing" all of our fallen brothers and sisters, so i say here, slick loads of love and much respect to all you beautiful people.
The months may change, but I am always APRIL
'63 F100 Custom Cab 223inline 6, 3speed manual- mostly stock https://www.youtube.com/coastiereid
Truck has been home in CA,OR,WA,NJ,VA since it's birth in San Jose Jan63
Geeze, what a score. I got 2 of mine in a town about an hour away, 1 from North Carolina, 1 from Tom and a nice guy on Craigslist shipped me one from Wisconsin. It only took 6 months to round all 5 up.
they used 8 on the f250s at least into the mid 1990s, i have no clue as to what is on them since then as i have not owned or worked on anything any newer.
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
i am just wanting my 250 to have that desired f100 appearance. some 225/70-16s and innie caps and it should kinda take to that look. lol
as for finding this stuff, let's just say i spend a lot of time on craigslist. a lot of time. the best scores seem to be when someone makes a typo and their stuff doesn't show up in the normal searches. lol.
always
"i believe i've achieved satisfaction".-bubbles
"should i be gettin" baked for this boys?"-bubbles
i could no longer keep "r.i.p.ing" all of our fallen brothers and sisters, so i say here, slick loads of love and much respect to all you beautiful people.
ICEMAN6166 wrote:they used 8 on the f250s at least into the mid 1990s, i have no clue as to what is on them since then as i have not owned or worked on anything any newer.
Still eight lug; like every other major manufacturer, they had to "metrify" the pattern and offsets so the late stuff won't interchange. Still not sure what Ford was thinking on the six lug one tons, however????
That and the crappy later SEVEN lug trucks; Ford couldn't even decide if they were "heavy duty F150's or "Light Duty" F250's!
End of rant!
Paul
The Ford Orphanage
Life's too short for boring vehicles!
My quest to develop a universal solvent is held up by the lack of a storage container.
Paul
Not sure where the point of equality is; but normally, more slightly smaller fasteners result in more clamping force with less torque. This could certainly become a factor on the side of the road with limited tools available.
Industrial compressor rods offer a good example; the rods were originally secured with one very large "jam" nut requiring a very large tool, and preferably a very large mechanic, to bring to the required torque. The advent of Supernuts changed that! A 3 inch or larger Supernut is ran up by hand, then secured by an abundance of fractional sized cap screws which result in superior clamping with much lower torque and effort.
Paul
The Ford Orphanage
Life's too short for boring vehicles!
My quest to develop a universal solvent is held up by the lack of a storage container.
Paul