I bought a complete cab kit from Tom a few years back and fitted it all, really happy with the quality and fit of everything but I am having some trouble with the door seals. I'm wondering if I installed them incorrectly or if I'm missing something.
The door fits well, top around the vent windows is all perfect, small gap at the bottom rear corner.
But inside I am getting a small gap where the vent window edge of the door contacts the cab. Its the same on both driver and passenger sides.
It wouldn't really bother me very much but Ive been driving the slick a lot the last few months and it REALLY catches the wind noise around the gap. If I pull the door HARD whilst driving the seal closes up a bit more and the wind noise reduces dramatically.
The pic below is with the door completely closed.


Ive just cracked the door slightly here so you can see where the gap is right at the top where the sun is coming through.


This is how I've fitted the seal




