Adavanced Adapters OD

The place to talk Slicks. All we ask is that discussion has something to do with slicks...

Moderators: Casey 65, Kid

Post Reply
User avatar
MN66
Posts: 185
Joined: November 3, 2014, 7:51 pm
Location: Chaska MN
United States of America

Adavanced Adapters OD

Post by MN66 »

Has anyone used a Ranger overdrive unit from Advanced Adapters?

Apparently they can be made to work with my NP435 and provide .73 OD ratio and can handle 420 ft lbs of torque.

They are 7.5" deep and install between the bellhousing and the trans - I think the shift lever location would still work with my bench seat.

Here's a link to the install docs:

http://www.advanceadapters.com/images/c ... 0OD(1).pdf

Thanks,
Corey
1966 F250 LWB
9Fingers
Posts: 189
Joined: September 26, 2015, 8:14 pm
Location: Virginia
United States of America

Re: Adavanced Adapters OD

Post by 9Fingers »

I am currently considering installing one of these in my project truck. I have read lots online about them and my concern is extra noise from the o.d. unit. I too am interested in what others with a ranger o.d. have to say about them.
Always know where you will be, when you get where you're going - Jerry Clower
User avatar
MN66
Posts: 185
Joined: November 3, 2014, 7:51 pm
Location: Chaska MN
United States of America

Re: Adavanced Adapters OD

Post by MN66 »

9Fingers wrote:I am currently considering installing one of these in my project truck. I have read lots online about them and my concern is extra noise from the o.d. unit. I too am interested in what others with a ranger o.d. have to say about them.
After doing some more research, it does seem like the main issue is gear whine/noise. I wonder if heavily sound deadening the floor and tunnel cover would make much difference?
1966 F250 LWB
bruceandersson
Posts: 906
Joined: August 12, 2009, 9:44 am
Location: Ohio

Re: Adavanced Adapters OD

Post by bruceandersson »

or a louder radio....
User avatar
MN66
Posts: 185
Joined: November 3, 2014, 7:51 pm
Location: Chaska MN
United States of America

Re: Adavanced Adapters OD

Post by MN66 »

bruceandersson wrote:or a louder radio....
Shucks - I've got the radio delete option. Might could go with open headers. :wink:
1966 F250 LWB
tomrooster
Posts: 613
Joined: July 28, 2006, 8:31 pm
Location: Monroe NJ
United States of America

Re: Adavanced Adapters OD

Post by tomrooster »

What does it cost? Tom
1966 F250 Camper Special parts truck
1966 F 100 w/391 ft
1965 F 100 project
1958 Edsel Pacer Convertible
1953 ford Customline 2 door
1952 8N
1967 triumph Bonneville

I'm still not a good welder but I've become a good grinder
jamesdfo
Posts: 1637
Joined: February 15, 2011, 10:32 am
Location: Edmonton, Alberta
Canada

Re: Adavanced Adapters OD

Post by jamesdfo »

I was also curious what this would cost, as I've seen used Gear Vendors Overdrives for (slightly) under a Thousand, and if you got the divorced style, other than having the driveshaft shortened (which would be necessary with the AA one as well), it should go in without much of a fight.....

James
tomrooster wrote:What does it cost? Tom
9Fingers
Posts: 189
Joined: September 26, 2015, 8:14 pm
Location: Virginia
United States of America

Re: Adavanced Adapters OD

Post by 9Fingers »

New from the manufacturer, $1,624.

New from summit, $1,575.

I am going with a 300 straight six, np435 transmission and married np205 transfer case. I think this would be perfect for splitting gears with the 4 speed and keeping revs low for highway speeds.
Always know where you will be, when you get where you're going - Jerry Clower
Leeroy
Posts: 1115
Joined: July 12, 2009, 3:52 am
Location: Melbourne, Australia
Australia

Re: Adavanced Adapters OD

Post by Leeroy »

There's a guy down this way that fitted one to a bronco, he complained about the noise also but if I recall some 'softer' gear oil helped. I'll try and dig up the thread.
Leeroy
Posts: 1115
Joined: July 12, 2009, 3:52 am
Location: Melbourne, Australia
Australia

Re: Adavanced Adapters OD

Post by Leeroy »

Post Reply