Has anyone used a Ranger overdrive unit from Advanced Adapters?
Apparently they can be made to work with my NP435 and provide .73 OD ratio and can handle 420 ft lbs of torque.
They are 7.5" deep and install between the bellhousing and the trans - I think the shift lever location would still work with my bench seat.
Here's a link to the install docs:
http://www.advanceadapters.com/images/c ... 0OD(1).pdf
Thanks,
Corey
Adavanced Adapters OD
Adavanced Adapters OD
1966 F250 LWB
Re: Adavanced Adapters OD
I am currently considering installing one of these in my project truck. I have read lots online about them and my concern is extra noise from the o.d. unit. I too am interested in what others with a ranger o.d. have to say about them.
Always know where you will be, when you get where you're going - Jerry Clower
Re: Adavanced Adapters OD
After doing some more research, it does seem like the main issue is gear whine/noise. I wonder if heavily sound deadening the floor and tunnel cover would make much difference?9Fingers wrote:I am currently considering installing one of these in my project truck. I have read lots online about them and my concern is extra noise from the o.d. unit. I too am interested in what others with a ranger o.d. have to say about them.
1966 F250 LWB
-
bruceandersson
- Posts: 906
- Joined: August 12, 2009, 9:44 am
- Location: Ohio
Re: Adavanced Adapters OD
or a louder radio....
Re: Adavanced Adapters OD
Shucks - I've got the radio delete option. Might could go with open headers.bruceandersson wrote:or a louder radio....
1966 F250 LWB
-
tomrooster
- Posts: 613
- Joined: July 28, 2006, 8:31 pm
- Location: Monroe NJ

Re: Adavanced Adapters OD
What does it cost? Tom
1966 F250 Camper Special parts truck
1966 F 100 w/391 ft
1965 F 100 project
1958 Edsel Pacer Convertible
1953 ford Customline 2 door
1952 8N
1967 triumph Bonneville
I'm still not a good welder but I've become a good grinder
1966 F 100 w/391 ft
1965 F 100 project
1958 Edsel Pacer Convertible
1953 ford Customline 2 door
1952 8N
1967 triumph Bonneville
I'm still not a good welder but I've become a good grinder
Re: Adavanced Adapters OD
I was also curious what this would cost, as I've seen used Gear Vendors Overdrives for (slightly) under a Thousand, and if you got the divorced style, other than having the driveshaft shortened (which would be necessary with the AA one as well), it should go in without much of a fight.....
James
James
tomrooster wrote:What does it cost? Tom
Re: Adavanced Adapters OD
New from the manufacturer, $1,624.
New from summit, $1,575.
I am going with a 300 straight six, np435 transmission and married np205 transfer case. I think this would be perfect for splitting gears with the 4 speed and keeping revs low for highway speeds.
New from summit, $1,575.
I am going with a 300 straight six, np435 transmission and married np205 transfer case. I think this would be perfect for splitting gears with the 4 speed and keeping revs low for highway speeds.
Always know where you will be, when you get where you're going - Jerry Clower
Re: Adavanced Adapters OD
There's a guy down this way that fitted one to a bronco, he complained about the noise also but if I recall some 'softer' gear oil helped. I'll try and dig up the thread.


