Bit size for Ford seat belt fasteners...
Bit size for Ford seat belt fasteners...
Does anyone know what size of Torx bit I need to unbolt the seatbelts in my '87 Grand Marquis? I had one once, but I don't remember what size it was. I'm assuming that most or all Fords of the same vintage use similar fasteners.
I'm 100% sure it's a T-50. If it's from a salt useing area you may go through a few with an impact gun. If you can use some penetrating oil from underneath before you try it helps alot. Buy a good one, The cheap ones are too hard of a temper and snap easily. The 70's were a T-45 and the newer ones are a T-55. The manufacturers just love to make us buy new tools every couple of years. Seriously what difference is there in the holding power of these bolts?
Dave
Dave
From a guy without his Ford that he left on a rock in the North Atlantic.
It is indeed size 50. I picked up a $30 set of six from Canadian Tire, guaranteed for life. And now I get to test that guarantee, because I snapped the bit on the one bolt that I didn't spray with penetrating oil. And I was using a 3/8-drive ratchet, not an impact.
So I see what you mean about the hard temper, Dave...
So I see what you mean about the hard temper, Dave...
I've broken two Sears T50's off on my Crown Vic's bolts...the remaining portion of the last one is still sitting in the bolt head.
I bought a Snap-on torx for 23 stinkin' dollars...have yet to try it.
I bought a Snap-on torx for 23 stinkin' dollars...have yet to try it.
My "Slickitis" affliction began here...

66 F100 CC/65 F100 CC/66 F250 CC
If it starts to rain, they'll tax the splash.
If you want to fish, they'll tax the bass.
If you plant a yard, they'll tax the grass.
If you don't play nice, they'll fine your *$#!

66 F100 CC/65 F100 CC/66 F250 CC
If it starts to rain, they'll tax the splash.
If you want to fish, they'll tax the bass.
If you plant a yard, they'll tax the grass.
If you don't play nice, they'll fine your *$#!
Ya but I think I've broke 2 Snap-ons in thirty years but anytime I buy a different brand It only lasts about a year before I run into a tough one so I buy another Snap-on.
You want to try and get a back seat belt out of a twenty year old GM after it's been sitting for 19 of them in a scrap yard
in salty Ontario. I had to sometimes cut the seat frame or the whole floor section came up with a couple.
Dave
You want to try and get a back seat belt out of a twenty year old GM after it's been sitting for 19 of them in a scrap yard
Dave
From a guy without his Ford that he left on a rock in the North Atlantic.


