no spark - very hot coil

The place to talk Slicks. All we ask is that discussion has something to do with slicks...

Moderators: Casey 65, Kid

User avatar
Toyz
Posts: 4334
Joined: March 22, 2011, 6:23 pm
Location: Baja Houston Taxes
United States of America

Re: no spark - very hot coil

Post by Toyz »

We know that it is NOT a Loadomatic, both from the springs and the 12127 base part number. So, you are golden, should be no problem to match it up, and even if a Ford core, it is likely to have a different part number on the casting. I believe Pertronix DOES make a drop-in distributor; it may be pricey in comparison, but will offer some confidence as opposed to the quality of replacement points/ condensers these days.
The Ford Orphanage
Life's too short for boring vehicles!
My quest to develop a universal solvent is held up by the lack of a storage container.
Paul
User avatar
redstone65
Posts: 139
Joined: August 30, 2017, 9:14 pm
Location: Birmingham, AL
United States of America

Re: no spark - very hot coil

Post by redstone65 »

Toyz wrote:it may be pricey in comparison, but will offer some confidence as opposed to the quality of replacement points/ condensers these days.
I ended up ordering a Ford modified HEI distributor with the coil and electronics and everything in the cap for that very reason. Definitely not cheap but makes me feel better. I’ll have to switch that resistance wire to a standard 12v wire, and it’s going to look hideous, but I’m hoping it’ll get me back on the road.

Found and marked top dead center on the harmonic balancer today. There were no markings to be found on the existing HB so I hope I got it close enough to true TDC. The current dizzy is pointing at cylinder #1 plug for sure.

When dropping in the new distributor, what is the best way to avoid the “off by one tooth” problem that I’ve seen mentioned?
Dave

1965 F-100 Flareside (240 6-cyl)
3 speed. Former military truck.
User avatar
redstone65
Posts: 139
Joined: August 30, 2017, 9:14 pm
Location: Birmingham, AL
United States of America

Re: no spark - very hot coil

Post by redstone65 »

Houston, we have ignition. Purrs like a kitten now.

For those wondering what an HEI distributor looks like in a Ford, here you go:

Image

Image

Thank god the cap was black. The picture on Summit showed a crazy blue color. That wasn't going to be ok.
Dave

1965 F-100 Flareside (240 6-cyl)
3 speed. Former military truck.
Post Reply