Slick on the Salt

A place for discussion of off topic subjects. Pretty much anything goes - just keep it civil, please!

Moderators: Casey 65, Kid

Post Reply
User avatar
Comet
Posts: 775
Joined: July 5, 2006, 10:03 pm
Location: Charleston, SC

Slick on the Salt

Post by Comet »

This is a buddy of mine's father's truck and his post on another forum:

So my dad's been building his truck for years to go and do this and he finally got it done... just in time for the USFRA (Utah Salt Flats Racing Association) "World of Speed" a couple weeks ago. He took his truck down and spent about 4 days down there. He passed the tech inspection, which was what he was most nervous about, with flying colors.

His truck is a '61 Ford "Unibody" (no seperate bed/cab) with a built 292cid Ford "Y-Block" OHV V8. He's running in the "Production Pickup, 300cid and under" class... which basically means a motor that came in the truck from the factory, and a mostly factory body/frame (no fiberglass panels, etc). It's built specifically for the flats... full interior cage, full interior and engine fire supression system, all the safety goodies like a 5pt harness, window net, etc for the driver.

The motor is punched out to JUST under 300cid (about 299), is running 10:1 compression with some head work and a nasty cam, custom-built headers... but the best part is that it has a Hilborn mechanical "air bleed" fuel injection system which is totally period perfect and really trick.

This was his first time out on the salt, and he ran a personal best of 102mph, which was pretty good for a first time. The record is somewhere in the neighborhood of 150 I believe. He's already planning to go back, but with some changes to the truck. 1st, instead of 3.0 gears, he's going with 3.5's... 2nd he's going to swap in a closer ratio 4-speed transmission instead of the stock 3-speed because he had trouble getting the motor back up to peak after the 2 to 3 shift due to the gears... Oh yeah, and he's tearing the motor down to put in higher comp pistons, lighter rods, and he mentioned some more work with the heads.

Check out the pics! (EDIT, if I could post pics on here you could see them. Very cool-sorry!)
I wish I could've taken time off work to go... I will next time though.
Also, http://www.halfpastnoon.net/videos/PICT0004.MOV

(Need quicktime for that one... right click, save as-takes forever, even with DSL to down load :roll: .)
If I
My Slick is rustier than your Slick! :D
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

Very cool, Comet. That may be the sweetest sounding Y block I have heard... :mrgreen:
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
User avatar
Comet
Posts: 775
Joined: July 5, 2006, 10:03 pm
Location: Charleston, SC

Post by Comet »

You should see the still pics on the salt. JimDog said he was going to look at how to post pics without jamming up the gallery. I didn't want to put these in my gallery since it's not my truck.
My Slick is rustier than your Slick! :D
User avatar
Comet
Posts: 775
Joined: July 5, 2006, 10:03 pm
Location: Charleston, SC

Post by Comet »

Actually, here is a link to the forum this was originally posted on:
http://www.nw-wheelers.com/forum/showthread.php?t=5288
My Slick is rustier than your Slick! :D
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

Need to register there to get in.. :cry:
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
User avatar
Comet
Posts: 775
Joined: July 5, 2006, 10:03 pm
Location: Charleston, SC

Post by Comet »

Johnny Canuck wrote:Need to register there to get in.. :cry:
Ok, ok...Jeez! If I remember tonight I'll load them to my photobucket site! :lol:
My Slick is rustier than your Slick! :D
User avatar
Comet
Posts: 775
Joined: July 5, 2006, 10:03 pm
Location: Charleston, SC

Post by Comet »

Alright. I guess this is just for JC as he seems to be the only one interested, so here ya go Bud!
In the pits:
Image
Image
Launch Pad:
Image
Take Off!
Image
My Slick is rustier than your Slick! :D
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

Very very Kewl, Thanks Comet!!
Hey we both passed 300 posts eh?

JC
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
User avatar
The Big M
Posts: 1360
Joined: August 9, 2006, 3:03 pm
Location: Rocky View County, AB
Canada

Post by The Big M »

Nice find. Awesome!

(I was interested, btw, just neglected to mention that the link didn't work)
User avatar
Comet
Posts: 775
Joined: July 5, 2006, 10:03 pm
Location: Charleston, SC

Post by Comet »

Johnny Canuck wrote:Very very Kewl, Thanks Comet!!
Hey we both passed 300 posts eh?

JC
I'm quitting at 304...wait! D'oh! :oops:
My Slick is rustier than your Slick! :D
User avatar
Comet
Posts: 775
Joined: July 5, 2006, 10:03 pm
Location: Charleston, SC

Post by Comet »

The Big M wrote:Nice find. Awesome!

(I was interested, btw, just neglected to mention that the link didn't work)
haha, that's ok Big M, just curious if anyone was paying attention or not. Rustling the bushes to see if I'd get a response. I really dig this truck. I need to make a trip over the mountains to check it out some day. The guy I know is actually the son of the owner of the truck. Nice kid. I'm probably about the same age as his dad-but we've never met! :lol:
My Slick is rustier than your Slick! :D
castruck_1964
Posts: 643
Joined: August 3, 2006, 3:45 pm
Location: Ramara Ontario
Canada

Post by castruck_1964 »

Very cool
I looked too but as usual others go quitely and JC speaks his piece. somebody has to be at the front of the bus :steering:
Slicks rule
dd/ 19 F150,97 Tbird
62 swb bbw uni next project
460 C6

Ken
Post Reply