Product brainstorming
Product brainstorming
Just a wild thought.
What would you guys like to see brought to market, chassis, brake, suspension wise? It doesn't have to relate to our trucks necessarily.
I have a few ideas I want to bounce off of you in the next few days. So some input would be great.
Already in the works to bring the Dakota based kit back to market and I plan on a purely aftermarket version with tube control arms and coilover/air springs.
Motor mount kits?
Transmission mount crossmembers?
Hood tilt kits?
Let me know
What would you guys like to see brought to market, chassis, brake, suspension wise? It doesn't have to relate to our trucks necessarily.
I have a few ideas I want to bounce off of you in the next few days. So some input would be great.
Already in the works to bring the Dakota based kit back to market and I plan on a purely aftermarket version with tube control arms and coilover/air springs.
Motor mount kits?
Transmission mount crossmembers?
Hood tilt kits?
Let me know
- jkimbrel65
- Posts: 965
- Joined: July 11, 2006, 8:53 pm
- Location: Athens Al

The tilt hood thing is a possibility. A simpler version of what I have on my truck is what we were thinking of.
If you do need to get in touch, please use my Email at info@industrialchassisinc.com or post a message on my Facebook Page
Thank you,
Steve
Thank you,
Steve
I looked at doing the one piece glass on my truck but ran out of ambition and time to do it. Pretty invasive mod as it takes out the support for the hinges. So something that would replace the hinge support and provide a new glass track would be in store.
Probably not a cheap kit,
Probably not a cheap kit,
If you do need to get in touch, please use my Email at info@industrialchassisinc.com or post a message on my Facebook Page
Thank you,
Steve
Thank you,
Steve
Good one!
If you do need to get in touch, please use my Email at info@industrialchassisinc.com or post a message on my Facebook Page
Thank you,
Steve
Thank you,
Steve
- jkimbrel65
- Posts: 965
- Joined: July 11, 2006, 8:53 pm
- Location: Athens Al

Yuck, nothing screams no talent 80's hot rod innovation than filling the window opening. May as well hang a "turbo" mirror from the filler panel too...Added a filler peice above the hinges to move the track out
I know it's possible to do on a one time basis. But without cutting the snot out of the door this one may just be a pipe dream. But I would really be interested in what you find out. The brace may come out easier than I think.
If you do need to get in touch, please use my Email at info@industrialchassisinc.com or post a message on my Facebook Page
Thank you,
Steve
Thank you,
Steve
- jkimbrel65
- Posts: 965
- Joined: July 11, 2006, 8:53 pm
- Location: Athens Al

my mom says turbo mirrors are cool
I would think that a Tank relocation kit would be cool (like what skip did)
There are a lot of guys who don't have the time or talent to make the hanger, or modify the tank. But for you to do would be nothing.
You might have to talk to Skip about $ for his intilectuale property.
also...
Cup holder in cigerete tray slot. (pull out like late 90 Chevys)
Bolt in 4-Link and other bolt on traction mods.
...More to come.
I would think that a Tank relocation kit would be cool (like what skip did)
There are a lot of guys who don't have the time or talent to make the hanger, or modify the tank. But for you to do would be nothing.
You might have to talk to Skip about $ for his intilectuale property.
also...
Cup holder in cigerete tray slot. (pull out like late 90 Chevys)
Bolt in 4-Link and other bolt on traction mods.
...More to come.
- Johnny Canuck
- Posts: 8291
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.

Stealing from another thread, I like the power rear window idea.
.........
Or a Nissan six mated to a Peugot 4 speed with a Mitsubishi rear end bolt -in kit. Don't forget to include the optional wood bed floor , or even better plastic, and rear coil springs. Can't leave anything that was worthwhile in the truck stay unscathed.
.........
Or a Nissan six mated to a Peugot 4 speed with a Mitsubishi rear end bolt -in kit. Don't forget to include the optional wood bed floor , or even better plastic, and rear coil springs. Can't leave anything that was worthwhile in the truck stay unscathed.
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
The tank relocation kit has merit too. I want to move mine but I don't want to cut the frame. There must be another tank that would just bolt in. If not I may have a sheetmetal shop fab one up, that will work with the factory pickup and sender. That is unless Elpolacko comes up with a Slick kit. No hurry, just in the next year or so.
One piece glass would be sweet too, but it has to have the right look. No filler panels.
One piece glass would be sweet too, but it has to have the right look. No filler panels.
A fabricated but simple bolt in gas tank may just happen. It is something we have already talked about.
If you do need to get in touch, please use my Email at info@industrialchassisinc.com or post a message on my Facebook Page
Thank you,
Steve
Thank you,
Steve
- FORDBOYpete
- Posts: 850
- Joined: July 21, 2006, 8:30 am
- Location: East Central Florida USA
Steve,
IF/When you dabble w/ contemplated replacement In Frame Fuel Tank be sure to make or leave a provision for the "in tank" High PSI pump, Return Capability & Controlled Vent caps, EFI set ups use, for those who aren't into making engine bay contained, closed loop, Hi PSI fuel return set ups.
As time goes by more & more folks will go with EFI. I believe their choice will be MAFS-TP/EFI as opposed to aftermarket, or central (TB FEI) based on performance, efficacy & efficiency as well as the new multi fuel & E-85 fuel programs that are starting to appear.
Just a thought. . . .
FBp
IF/When you dabble w/ contemplated replacement In Frame Fuel Tank be sure to make or leave a provision for the "in tank" High PSI pump, Return Capability & Controlled Vent caps, EFI set ups use, for those who aren't into making engine bay contained, closed loop, Hi PSI fuel return set ups.
As time goes by more & more folks will go with EFI. I believe their choice will be MAFS-TP/EFI as opposed to aftermarket, or central (TB FEI) based on performance, efficacy & efficiency as well as the new multi fuel & E-85 fuel programs that are starting to appear.
Just a thought. . . .
FBp
Change is the Only Constant
- Johnny Canuck
- Posts: 8291
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.

