Product brainstorming

A place for discussion of off topic subjects. Pretty much anything goes - just keep it civil, please!

Moderators: Casey 65, Kid

Post Reply
ELpolacko
Posts: 293
Joined: August 10, 2006, 7:21 pm
Location: Phoenix, AZ
Contact:

Product brainstorming

Post by ELpolacko »

Just a wild thought.

What would you guys like to see brought to market, chassis, brake, suspension wise? It doesn't have to relate to our trucks necessarily.

I have a few ideas I want to bounce off of you in the next few days. So some input would be great.

Already in the works to bring the Dakota based kit back to market and I plan on a purely aftermarket version with tube control arms and coilover/air springs.

Motor mount kits?
Transmission mount crossmembers?
Hood tilt kits?

Let me know
User avatar
jkimbrel65
Posts: 965
Joined: July 11, 2006, 8:53 pm
Location: Athens Al
United States of America

Post by jkimbrel65 »

I would love to see a tilt hood and a one peice side glass for our slicks
I tried being normal once...
was the worst 10 minutes of my life
ELpolacko
Posts: 293
Joined: August 10, 2006, 7:21 pm
Location: Phoenix, AZ
Contact:

Post by ELpolacko »

The tilt hood thing is a possibility. A simpler version of what I have on my truck is what we were thinking of.
If you do need to get in touch, please use my Email at info@industrialchassisinc.com or post a message on my Facebook Page

Thank you,
Steve
ELpolacko
Posts: 293
Joined: August 10, 2006, 7:21 pm
Location: Phoenix, AZ
Contact:

Post by ELpolacko »

I looked at doing the one piece glass on my truck but ran out of ambition and time to do it. Pretty invasive mod as it takes out the support for the hinges. So something that would replace the hinge support and provide a new glass track would be in store.

Probably not a cheap kit, :wink:
If you do need to get in touch, please use my Email at info@industrialchassisinc.com or post a message on my Facebook Page

Thank you,
Steve
BigTim
Posts: 890
Joined: August 6, 2006, 4:26 pm
Location: Slickless

Post by BigTim »

I would like to find a "Lightning" style traction bar setup, or a Cal Tracs system that would work on a Slick.
ELpolacko
Posts: 293
Joined: August 10, 2006, 7:21 pm
Location: Phoenix, AZ
Contact:

Post by ELpolacko »

Good one!
If you do need to get in touch, please use my Email at info@industrialchassisinc.com or post a message on my Facebook Page

Thank you,
Steve
User avatar
jkimbrel65
Posts: 965
Joined: July 11, 2006, 8:53 pm
Location: Athens Al
United States of America

Post by jkimbrel65 »

Saw 2 different trucks at the supernats one 04 one 05 that had one peice glass and left the hinges stock. Added a filler peice above the hinges to move the track out. May cut up a door just to see what I can come up with
I tried being normal once...
was the worst 10 minutes of my life
ELpolacko
Posts: 293
Joined: August 10, 2006, 7:21 pm
Location: Phoenix, AZ
Contact:

Post by ELpolacko »

Added a filler peice above the hinges to move the track out
Yuck, nothing screams no talent 80's hot rod innovation than filling the window opening. May as well hang a "turbo" mirror from the filler panel too... :roll:

I know it's possible to do on a one time basis. But without cutting the snot out of the door this one may just be a pipe dream. But I would really be interested in what you find out. The brace may come out easier than I think.
If you do need to get in touch, please use my Email at info@industrialchassisinc.com or post a message on my Facebook Page

Thank you,
Steve
User avatar
Comet
Posts: 775
Joined: July 5, 2006, 10:03 pm
Location: Charleston, SC

Post by Comet »

I've always wanted FE dress up chrome parts. Lots of billet, not much chrome out there.
My Slick is rustier than your Slick! :D
User avatar
jkimbrel65
Posts: 965
Joined: July 11, 2006, 8:53 pm
Location: Athens Al
United States of America

Post by jkimbrel65 »

Yuck, nothing screams no talent 80's hot rod innovation than filling the window opening. May as well hang a "turbo" mirror from the filler panel too... :roll:
:rotflmao: That was almost my exact thought
I tried being normal once...
was the worst 10 minutes of my life
MadMaxetc
Posts: 2600
Joined: July 10, 2006, 12:00 pm
Location: Wichita, KS
Contact:
United States of America

Post by MadMaxetc »

my mom says turbo mirrors are cool :(

I would think that a Tank relocation kit would be cool (like what skip did)

There are a lot of guys who don't have the time or talent to make the hanger, or modify the tank. But for you to do would be nothing.

You might have to talk to Skip about $ for his intilectuale property.

also...

Cup holder in cigerete tray slot. (pull out like late 90 Chevys)

Bolt in 4-Link and other bolt on traction mods.

...More to come.
Dan
Project: '63 F-100 LWB / 460 / C6 / 2x4
My Build Thread
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

Stealing from another thread, I like the power rear window idea.


.........

Or a Nissan six mated to a Peugot 4 speed with a Mitsubishi rear end bolt -in kit. Don't forget to include the optional wood bed floor , or even better plastic, and rear coil springs. Can't leave anything that was worthwhile in the truck stay unscathed.
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
BigTim
Posts: 890
Joined: August 6, 2006, 4:26 pm
Location: Slickless

Post by BigTim »

The tank relocation kit has merit too. I want to move mine but I don't want to cut the frame. There must be another tank that would just bolt in. If not I may have a sheetmetal shop fab one up, that will work with the factory pickup and sender. That is unless Elpolacko comes up with a Slick kit. No hurry, just in the next year or so. :D

One piece glass would be sweet too, but it has to have the right look. No filler panels.
ELpolacko
Posts: 293
Joined: August 10, 2006, 7:21 pm
Location: Phoenix, AZ
Contact:

Post by ELpolacko »

A fabricated but simple bolt in gas tank may just happen. It is something we have already talked about.
If you do need to get in touch, please use my Email at info@industrialchassisinc.com or post a message on my Facebook Page

Thank you,
Steve
User avatar
FORDBOYpete
Posts: 850
Joined: July 21, 2006, 8:30 am
Location: East Central Florida USA

Post by FORDBOYpete »

Steve,
IF/When you dabble w/ contemplated replacement In Frame Fuel Tank be sure to make or leave a provision for the "in tank" High PSI pump, Return Capability & Controlled Vent caps, EFI set ups use, for those who aren't into making engine bay contained, closed loop, Hi PSI fuel return set ups.

As time goes by more & more folks will go with EFI. I believe their choice will be MAFS-TP/EFI as opposed to aftermarket, or central (TB FEI) based on performance, efficacy & efficiency as well as the new multi fuel & E-85 fuel programs that are starting to appear.

Just a thought. . . . :roll:

FBp 8)
Change is the Only Constant
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

How about a smooth-in middle brake light kit you could bondo/rivet into the tailgate or the back of the cab..
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
Post Reply