Wreckers
Wreckers
As if I don't have enough to do right now I am considering a Wrecker. I thought I might just take the box off the 79 F-250 I have and put a wrecker body on it but was wondering if a Auto trans would be ok in it. I have found a few for sale and the price isnt as bad as I expected to just buy a running one. Anyone who has a wrecker for their Buisness of just for fun let me know what you have found to work the best. i will be using it mainly for the Restoration work I am doing to bring stuff home to my shop. I could have used one several times in the last couple of weeks, fuel pump went out of my Wifes pickup, my Neighbor had the water pump went out of his wifes van, put my Duster up for Sale and could use it when someone buys it, Got to haul the 59 International Pickup home in about a Week that I will be working on for a Guy locally, and been a few other times one would have come in handy. .................Kid
Having spent some time driving wreckers. And being kinda particular about my stuff. Considering you will be hauling restoration projects. I have seen slings bend bumpers, wheel lifts (although better than slings) can be a pain. If you can swing it get a rollback/flatbed tow truck. My .02 + $ 1.02 more worth of experience.
1964 F 100 - I am going to do "something" with it.......
viewtopic.php?f=32&t=15942
1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD
~ Yes - I adopted another cat..............
Cam L Milan,
You'll be missed my friend.
viewtopic.php?f=32&t=15942
1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD
~ Yes - I adopted another cat..............
Cam L Milan,
You'll be missed my friend.
- DV65CustomCab
- Posts: 1497
- Joined: July 18, 2006, 4:23 pm
- Location: Elizabethtown, PA

-
ICEMAN6166
- Posts: 11470
- Joined: July 11, 2006, 11:28 am
- Location: Dove Creek, Co. elevation 6842

slidebacks are best.can put anything on it , even building materials.
wreckers come next, our trucks can be towed with a sling.a wheellift is better though.
the vulcan strapless lift is in my opinion one of the best.
trailers can be a pain in the @ss.
tow dollys just plain suck and should be outlawed
granted there are some nice trailers but i would rather have a wrecker or slideback.
if you are only towing your own stuff you do not need commercial insurance.
at least not here.
it is hard to find a cheap used wrecker that is not worn out in some place or other.
i like the old holmes twin boom i put on my 65. nice to be able to swing a boom around the side to lift an engine or something.
wreckers come next, our trucks can be towed with a sling.a wheellift is better though.
the vulcan strapless lift is in my opinion one of the best.
trailers can be a pain in the @ss.
tow dollys just plain suck and should be outlawed
granted there are some nice trailers but i would rather have a wrecker or slideback.
if you are only towing your own stuff you do not need commercial insurance.
at least not here.
it is hard to find a cheap used wrecker that is not worn out in some place or other.
i like the old holmes twin boom i put on my 65. nice to be able to swing a boom around the side to lift an engine or something.
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
- Alan Mclennan
- Posts: 9324
- Joined: October 14, 2006, 6:16 pm
- Location: In the shed... Cranebrook NSW

Theres acouple around here cheap,but the postage would be a bugger!
Heres a International needs some work,
[img][albumimg]3002[/albumimg][/img]
what about a Bedford
[img][albumimg]3004[/albumimg][/img]
My money would be with the car trailor less moving parts to go wrong
Alan,
Heres a International needs some work,
[img][albumimg]3002[/albumimg][/img]
what about a Bedford
[img][albumimg]3004[/albumimg][/img]
My money would be with the car trailor less moving parts to go wrong
Alan,
Honey, If I say I`ll fix something I will, there`s no need to remind me every 6 months!!
66 f100 tabletop swb 351 Clevo C6 "Beryl"
Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8..............................
66 f100 tabletop swb 351 Clevo C6 "Beryl"
Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8..............................
- 6166 Junkyard Dog
- Posts: 3502
- Joined: July 23, 2006, 9:34 am
- Location: Reidsville, N.C.
- Contact:

[albumimg]1739[/albumimg]
How bout this Ice
How bout this Ice
Tom,
@
Lazy FORD Ranch
Where Ford Trucks Rest in Peace
Dakota,,, RIP will never be the same looking for 61-66 trucks again ,,
Kathy
Slickstock,,, York, PA
Slickstock,,, Kansas City, MO
Slickstock,,, Altoona, IOWA
Slickstock,,, Salina, KS
Now Cooper will try his best

Cooper now has 2018 Slick Stock,, give him a fair star
Slickstock Kansas City, Mo
@
Lazy FORD Ranch
Where Ford Trucks Rest in Peace
Dakota,,, RIP will never be the same looking for 61-66 trucks again ,,
Slickstock,,, York, PA
Slickstock,,, Kansas City, MO
Slickstock,,, Altoona, IOWA
Slickstock,,, Salina, KS
Now Cooper will try his best
Cooper now has 2018 Slick Stock,, give him a fair star
Slickstock Kansas City, Mo
Kid,
I like the trailer Idea also. The guy that bought my ranch wagon had a trailer with a winch but the "slick" thing about it was the winch was mounted on 2" tubing and there was a tow receiver on the front of the trailer. All he did was pull the pin and remove the winch. He said when the trailer was not attached he can also install the winch on the tow receiver. He also had a receiver at the front of the utility box on the truck so when using it for his heating /plumbing business that is how he loaded furnaces. Raised the furnaces up with the lift gate then dragged them into the bed with the winch. With just a few extra bucks for square tubing he had a very handy setup.
I wondered if some type of "boom" could be incorporated with the winch when installed at the front of the bed. May be handy for various things????
I like the trailer Idea also. The guy that bought my ranch wagon had a trailer with a winch but the "slick" thing about it was the winch was mounted on 2" tubing and there was a tow receiver on the front of the trailer. All he did was pull the pin and remove the winch. He said when the trailer was not attached he can also install the winch on the tow receiver. He also had a receiver at the front of the utility box on the truck so when using it for his heating /plumbing business that is how he loaded furnaces. Raised the furnaces up with the lift gate then dragged them into the bed with the winch. With just a few extra bucks for square tubing he had a very handy setup.
I wondered if some type of "boom" could be incorporated with the winch when installed at the front of the bed. May be handy for various things????
-
ICEMAN6166
- Posts: 11470
- Joined: July 11, 2006, 11:28 am
- Location: Dove Creek, Co. elevation 6842

well sure heres onejwh f-100 wrote:I wondered if some type of "boom" could be incorporated with the winch when installed at the front of the bed. May be handy for various things????
[albumimg]2928[/albumimg]
[albumimg]2926[/albumimg]
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
wrecker
Kid
Here is my setup. I do not haul any thing that does not belong to me with very few exceptions. Insurance is the big issue. With this setup I can get almost anything home with almost no damage. The boom goes up and down hydraulickly and I have found that mounting the winch on top of the boom works the best for me. If something doesn't roll very good while pulling it up on the trailer I can raise the boom and lift the vehicle up and then pull it on to the trailer. I have the strap lift that works really well too. For me this setup works for just about everything I have encountered so far.
Good luck with your project






Here is my setup. I do not haul any thing that does not belong to me with very few exceptions. Insurance is the big issue. With this setup I can get almost anything home with almost no damage. The boom goes up and down hydraulickly and I have found that mounting the winch on top of the boom works the best for me. If something doesn't roll very good while pulling it up on the trailer I can raise the boom and lift the vehicle up and then pull it on to the trailer. I have the strap lift that works really well too. For me this setup works for just about everything I have encountered so far.
Good luck with your project






wrecker
Kid
Here is my setup. I do not haul any thing that does not belong to me with very few exceptions. Insurance is the big issue. With this setup I can get almost anything home with almost no damage. The boom goes up and down hydraulickly and I have found that mounting the winch on top of the boom works the best for me. If something doesn't roll very good while pulling it up on the trailer I can raise the boom and lift the vehicle up and then pull it on to the trailer. I have the strap lift that works really well too. For me this setup works for just about everything I have encountered so far.
Good luck with your project






Here is my setup. I do not haul any thing that does not belong to me with very few exceptions. Insurance is the big issue. With this setup I can get almost anything home with almost no damage. The boom goes up and down hydraulickly and I have found that mounting the winch on top of the boom works the best for me. If something doesn't roll very good while pulling it up on the trailer I can raise the boom and lift the vehicle up and then pull it on to the trailer. I have the strap lift that works really well too. For me this setup works for just about everything I have encountered so far.
Good luck with your project






-
ICEMAN6166
- Posts: 11470
- Joined: July 11, 2006, 11:28 am
- Location: Dove Creek, Co. elevation 6842


