Wreckers

A place for discussion of off topic subjects. Pretty much anything goes - just keep it civil, please!

Moderators: Casey 65, Kid

Post Reply
Kid
Posts: 2570
Joined: March 16, 2006, 9:39 pm
Location: Iowa
Contact:
United States of America

Wreckers

Post by Kid »

As if I don't have enough to do right now I am considering a Wrecker. I thought I might just take the box off the 79 F-250 I have and put a wrecker body on it but was wondering if a Auto trans would be ok in it. I have found a few for sale and the price isnt as bad as I expected to just buy a running one. Anyone who has a wrecker for their Buisness of just for fun let me know what you have found to work the best. i will be using it mainly for the Restoration work I am doing to bring stuff home to my shop. I could have used one several times in the last couple of weeks, fuel pump went out of my Wifes pickup, my Neighbor had the water pump went out of his wifes van, put my Duster up for Sale and could use it when someone buys it, Got to haul the 59 International Pickup home in about a Week that I will be working on for a Guy locally, and been a few other times one would have come in handy. .................Kid
User avatar
Greg D
Posts: 10113
Joined: September 13, 2006, 4:39 pm
Location: Podunk Iowa
United States of America

Post by Greg D »

Having spent some time driving wreckers. And being kinda particular about my stuff. Considering you will be hauling restoration projects. I have seen slings bend bumpers, wheel lifts (although better than slings) can be a pain. If you can swing it get a rollback/flatbed tow truck. My .02 + $ 1.02 more worth of experience.
1964 F 100 - I am going to do "something" with it.......

viewtopic.php?f=32&t=15942

1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD


~ Yes - I adopted another cat..............

Cam L Milan,
You'll be missed my friend.
jeepbut
Posts: 652
Joined: April 15, 2006, 8:15 pm
Location: Corpus Christi, Texas
United States of America

Post by jeepbut »

Get a car trailer with a winch and pull it with the F-250. Saves another insureance and another set of tires etc. Thanks, Lyman.
Kid
Posts: 2570
Joined: March 16, 2006, 9:39 pm
Location: Iowa
Contact:
United States of America

Post by Kid »

I have a good heavy trailer with a winch on it but I was considering a wrecker just to save me some hassle. I also figured it might be a way to earn some extra money................Kid
User avatar
DV65CustomCab
Posts: 1497
Joined: July 18, 2006, 4:23 pm
Location: Elizabethtown, PA
United States of America

Post by DV65CustomCab »

Unless Iowa is different, check the insurance on one. Wreckers and rollbacks are very high to insure, whereas a truck pulling a trailer isn't. No, I can't explain it either.
Stop The Longbed Hate! :)
'65 F100 Custom Cab bought 2002/Sold 2014
Now: '93 F150 Lightning
ICEMAN6166
Posts: 11470
Joined: July 11, 2006, 11:28 am
Location: Dove Creek, Co. elevation 6842
Poland

Post by ICEMAN6166 »

slidebacks are best.can put anything on it , even building materials.
wreckers come next, our trucks can be towed with a sling.a wheellift is better though.
the vulcan strapless lift is in my opinion one of the best.
trailers can be a pain in the @ss.
tow dollys just plain suck and should be outlawed
granted there are some nice trailers but i would rather have a wrecker or slideback.
if you are only towing your own stuff you do not need commercial insurance.
at least not here.

it is hard to find a cheap used wrecker that is not worn out in some place or other.

i like the old holmes twin boom i put on my 65. nice to be able to swing a boom around the side to lift an engine or something.
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
User avatar
Alan Mclennan
Posts: 9324
Joined: October 14, 2006, 6:16 pm
Location: In the shed... Cranebrook NSW
Australia

Post by Alan Mclennan »

Theres acouple around here cheap,but the postage would be a bugger!
Heres a International needs some work,
[img][albumimg]3002[/albumimg][/img]
what about a Bedford
[img][albumimg]3004[/albumimg][/img]
My money would be with the car trailor less moving parts to go wrong :wink:


Alan,
Honey, If I say I`ll fix something I will, there`s no need to remind me every 6 months!!
66 f100 tabletop swb 351 Clevo C6 "Beryl"

Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8.............................. cry.gif
User avatar
6166 Junkyard Dog
Posts: 3502
Joined: July 23, 2006, 9:34 am
Location: Reidsville, N.C.
Contact:
United States of America

Post by 6166 Junkyard Dog »

[albumimg]1739[/albumimg]

How bout this Ice :?:
Tom,
@
Lazy FORD Ranch
Where Ford Trucks Rest in Peace

Dakota,,, RIP will never be the same looking for 61-66 trucks again ,, :cry: Kathy :cry:
Slickstock,,, York, PA
Slickstock,,, Kansas City, MO
Slickstock,,, Altoona, IOWA
Slickstock,,, Salina, KS

Now Cooper will try his best :lol: :lol:

12649

Cooper now has 2018 Slick Stock,, give him a fair star :lol:
Slickstock Kansas City, Mo
User avatar
jwh f-100
Posts: 1903
Joined: June 11, 2007, 6:25 pm
Location: Equinunk, PA
United States of America

Post by jwh f-100 »

Kid,
I like the trailer Idea also. The guy that bought my ranch wagon had a trailer with a winch but the "slick" thing about it was the winch was mounted on 2" tubing and there was a tow receiver on the front of the trailer. All he did was pull the pin and remove the winch. He said when the trailer was not attached he can also install the winch on the tow receiver. He also had a receiver at the front of the utility box on the truck so when using it for his heating /plumbing business that is how he loaded furnaces. Raised the furnaces up with the lift gate then dragged them into the bed with the winch. With just a few extra bucks for square tubing he had a very handy setup.

I wondered if some type of "boom" could be incorporated with the winch when installed at the front of the bed. May be handy for various things????
ICEMAN6166
Posts: 11470
Joined: July 11, 2006, 11:28 am
Location: Dove Creek, Co. elevation 6842
Poland

Post by ICEMAN6166 »

jwh f-100 wrote:I wondered if some type of "boom" could be incorporated with the winch when installed at the front of the bed. May be handy for various things????
well sure heres one
[albumimg]2928[/albumimg]

[albumimg]2926[/albumimg]
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
oldtrucks
Posts: 1015
Joined: November 28, 2007, 1:59 am
Location: Pinehurst Idaho
United States of America

wrecker

Post by oldtrucks »

Kid

Here is my setup. I do not haul any thing that does not belong to me with very few exceptions. Insurance is the big issue. With this setup I can get almost anything home with almost no damage. The boom goes up and down hydraulickly and I have found that mounting the winch on top of the boom works the best for me. If something doesn't roll very good while pulling it up on the trailer I can raise the boom and lift the vehicle up and then pull it on to the trailer. I have the strap lift that works really well too. For me this setup works for just about everything I have encountered so far.

Good luck with your project

Image
Image
Image
Image
Image
Image
Mike Kincheloe
Mikes Old Trucks
I restore old trucks and cars


1962 UNI Short Box, Stock Y block, 4 speed Image
1972 F 250 4X4 429 4 speed Dana 70 rear
1977 F 350 Camper Special, Ranger, Super Cab
1950 F7 Cab and Chassis
1976 F150 4 Speed 4 X 4
1996 Taurus
oldtrucks
Posts: 1015
Joined: November 28, 2007, 1:59 am
Location: Pinehurst Idaho
United States of America

wrecker

Post by oldtrucks »

Kid

Here is my setup. I do not haul any thing that does not belong to me with very few exceptions. Insurance is the big issue. With this setup I can get almost anything home with almost no damage. The boom goes up and down hydraulickly and I have found that mounting the winch on top of the boom works the best for me. If something doesn't roll very good while pulling it up on the trailer I can raise the boom and lift the vehicle up and then pull it on to the trailer. I have the strap lift that works really well too. For me this setup works for just about everything I have encountered so far.

Good luck with your project

Image
Image
Image
Image
Image
Image
Mike Kincheloe
Mikes Old Trucks
I restore old trucks and cars


1962 UNI Short Box, Stock Y block, 4 speed Image
1972 F 250 4X4 429 4 speed Dana 70 rear
1977 F 350 Camper Special, Ranger, Super Cab
1950 F7 Cab and Chassis
1976 F150 4 Speed 4 X 4
1996 Taurus
ICEMAN6166
Posts: 11470
Joined: July 11, 2006, 11:28 am
Location: Dove Creek, Co. elevation 6842
Poland

Post by ICEMAN6166 »

Mike that is one tough looking 4x4 with that boom. i like the way that looks i think the top winch is a good idea, i have seen others like it before.
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
Post Reply