Shop Compressor drain
- greythorn3
- Posts: 107
- Joined: September 26, 2007, 12:49 am
- Location: anchorage alaska
- Contact:
I put the harbor freight auto compressor drain kit on mine and it was a piece of crap it blew apart and hasent worked since.. i could have got a bad one though.. but i somehow doulbt it.. the black activation hose kept melting and popping out it was a nightmare.
Ray
Ray
wheelordie.com my alaska offroad website
- greythorn3
- Posts: 107
- Joined: September 26, 2007, 12:49 am
- Location: anchorage alaska
- Contact:
i also had the harbor freight air filter regulator that broke right away
http://www.harborfreight.com/cpi/ctaf/d ... umber=1118
heres a link to the drain kit i used
http://www.harborfreight.com/cpi/ctaf/d ... mber=46960
http://www.harborfreight.com/cpi/ctaf/d ... umber=1118
heres a link to the drain kit i used
http://www.harborfreight.com/cpi/ctaf/d ... mber=46960
wheelordie.com my alaska offroad website
My "Slickitis" affliction began here...

66 F100 CC/65 F100 CC/66 F250 CC
If it starts to rain, they'll tax the splash.
If you want to fish, they'll tax the bass.
If you plant a yard, they'll tax the grass.
If you don't play nice, they'll fine your *$#!

66 F100 CC/65 F100 CC/66 F250 CC
If it starts to rain, they'll tax the splash.
If you want to fish, they'll tax the bass.
If you plant a yard, they'll tax the grass.
If you don't play nice, they'll fine your *$#!
Jim I had a auto drain I got from Grainger, it was under a 100 bucks and ran off of a timer. Set it up to drain whenever and however often you need. I think if you would have it drain to the outside a few seconds every hour you would soon get the water level managble in your air tank.
Check it out, http://www.grainger.com/Grainger/items/1TCB2

Check it out, http://www.grainger.com/Grainger/items/1TCB2
- greythorn3
- Posts: 107
- Joined: September 26, 2007, 12:49 am
- Location: anchorage alaska
- Contact:
If your getting too much water in your compressor tank, it likely because your compressor is too small and it running constantly.
Most portable compressors are about 80 cfm at 90 psi. But the duty cycle is about 15%. This means you can really only run the tool 15 seconds out of a minute. If your accesory is running at 40 cfm, your compressor really has to be about 160 cfm to run it continuosly. But since it is only about 80 cfm, it cannot keep the tank pressuriized and runs all the time.
This pulls in more air (read: moisture) and the heated compressor sends the hot, wet air into the tank, where it condenses. Once the tank has enough moisture, the air flow will actuall push most of that moist air into the hose where it cools rather quickly.
Just FYI
Most portable compressors are about 80 cfm at 90 psi. But the duty cycle is about 15%. This means you can really only run the tool 15 seconds out of a minute. If your accesory is running at 40 cfm, your compressor really has to be about 160 cfm to run it continuosly. But since it is only about 80 cfm, it cannot keep the tank pressuriized and runs all the time.
This pulls in more air (read: moisture) and the heated compressor sends the hot, wet air into the tank, where it condenses. Once the tank has enough moisture, the air flow will actuall push most of that moist air into the hose where it cools rather quickly.
Just FYI
I hate Message Boards.
The real problem with my compressor is that it doesn't get used enough. Here lately, I've been cleaning up some parts in the media blaster. The compressor runs most of the time that I'm blasting. I've been using about 100# line pressure to blast parts. This unit has a 60 or 80 gallon tank. Not sure which. Anyway it does pretty good job but when I get through with this, it may not get used for weeks. I am think about reducing line pressure to about 80# as I think it will do a better job. It is an old heavy duty 5 HP 2 stage unit. It really goes crazy when I get the die grinder out.

Jim
I also got my auto drain valve at Grainger, but mine is less techy than the one Tim posted and a little cheaper. Works great, trouble free:
http://www.grainger.com/Grainger/items/4KT04
http://www.grainger.com/Grainger/items/4KT04
My Slick is rustier than your Slick! 
Do you put a pan or anything under it to catch the drips?Comet wrote:I also got my auto drain valve at Grainger, but mine is less techy than the one Tim posted and a little cheaper. Works great, trouble free:
http://www.grainger.com/Grainger/items/4KT04
Jim

