Can anyone tell me if the rear shackles and mounts are different on the 61-64 and the 65-66? I need to get my rear lowered about 2 inches to set up my angles. I cant find any lowering shackles for my 62. Any info would be appreciated.
Mike
Lowering shackles????
- Choppermike
- Posts: 51
- Joined: March 8, 2007, 3:06 pm
- Location: Perryville, AR
- Contact:
Lowering shackles????
1962 F100 Unibody- Ol' Jack
65 Mustang Coupe
92 Mustang LX
2006 Mustang
[albumimg]3443[/albumimg]
65 Mustang Coupe
92 Mustang LX
2006 Mustang
[albumimg]3443[/albumimg]
- jkimbrel65
- Posts: 965
- Joined: July 11, 2006, 8:53 pm
- Location: Athens Al

- Choppermike
- Posts: 51
- Joined: March 8, 2007, 3:06 pm
- Location: Perryville, AR
- Contact:
- Johnny Canuck
- Posts: 8291
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.

I have always wanted to ask this ????
My logic tells me that in order to lower a truck by 2" in the rear the shackles would need to be about 4" shorter. Well I don't have 4" between the spring eye and the frame, so how is this possible? And the resulting pinion angle would be WAY off.
And since we are talkin lowering....I only started with 5" between the frame and the front springs on my Uni. I removed a leaf and this resuled in 2 1/2" of clearance. You guys are telling me that you drop the front 4". Again how is this possible?
I understand that there are other options but many people seem to do it this way
Tim
My logic tells me that in order to lower a truck by 2" in the rear the shackles would need to be about 4" shorter. Well I don't have 4" between the spring eye and the frame, so how is this possible? And the resulting pinion angle would be WAY off.
And since we are talkin lowering....I only started with 5" between the frame and the front springs on my Uni. I removed a leaf and this resuled in 2 1/2" of clearance. You guys are telling me that you drop the front 4". Again how is this possible?
I understand that there are other options but many people seem to do it this way
Tim
INEPTOCRACY: (in-ep'-toc-ra-cy) : a system of government where the least capable to lead are elected by the least capable of producing, and where the members of society least likely to sustain themselves or succeed are rewarded with goods and services paid for by the confiscated wealth of a diminishing number of producers.
- Choppermike
- Posts: 51
- Joined: March 8, 2007, 3:06 pm
- Location: Perryville, AR
- Contact:
- Choppermike
- Posts: 51
- Joined: March 8, 2007, 3:06 pm
- Location: Perryville, AR
- Contact:
- Johnny Canuck
- Posts: 8291
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.

I used the shacles only. You can also drill out the rivets on the front hangers and just move them up. My drop is slight, i might use Tim Fanatics method, depending on my ride, and remove some leafs from the rear too.
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
